.. _ensemble:

================
Ensemble methods
================

.. currentmodule:: sklearn.ensemble

The goal of **ensemble methods** is to combine the predictions of several
base estimators built with a given learning algorithm in order to improve
generalizability / robustness over a single estimator.

Two families of ensemble methods are usually distinguished:

- In **averaging methods**, the driving principle is to build several
  estimators independently and then to average their predictions. On average,
  the combined estimator is usually better than any of the single base
  estimator because its variance is reduced.

  **Examples:** :ref:`Bagging methods <bagging>`, :ref:`Forests of randomized trees <forest>`, ...

- By contrast, in **boosting methods**, base estimators are built sequentially
  and one tries to reduce the bias of the combined estimator. The motivation is
  to combine several weak models to produce a powerful ensemble.

  **Examples:** :ref:`AdaBoost <adaboost>`, :ref:`Gradient Tree Boosting <gradient_boosting>`, ...


.. _bagging:

Bagging meta-estimator
======================

In ensemble algorithms, bagging methods form a class of algorithms which build
several instances of a black-box estimator on random subsets of the original
training set and then aggregate their individual predictions to form a final
prediction. These methods are used as a way to reduce the variance of a base
estimator (e.g., a decision tree), by introducing randomization into its
construction procedure and then making an ensemble out of it. In many cases,
bagging methods constitute a very simple way to improve with respect to a
single model, without making it necessary to adapt the underlying base
algorithm. As they provide a way to reduce overfitting, bagging methods work
best with strong and complex models (e.g., fully developed decision trees), in
contrast with boosting methods which usually work best with weak models (e.g.,
shallow decision trees).

Bagging methods come in many flavours but mostly differ from each other by the
way they draw random subsets of the training set:

  * When random subsets of the dataset are drawn as random subsets of the
    samples, then this algorithm is known as Pasting [B1999]_.

  * When samples are drawn with replacement, then the method is known as
    Bagging [B1996]_.

  * When random subsets of the dataset are drawn as random subsets of
    the features, then the method is known as Random Subspaces [H1998]_.

  * Finally, when base estimators are built on subsets of both samples and
    features, then the method is known as Random Patches [LG2012]_.

In scikit-learn, bagging methods are offered as a unified
:class:`BaggingClassifier` meta-estimator  (resp. :class:`BaggingRegressor`),
taking as input a user-specified base estimator along with parameters
specifying the strategy to draw random subsets. In particular, ``max_samples``
and ``max_features`` control the size of the subsets (in terms of samples and
features), while ``bootstrap`` and ``bootstrap_features`` control whether
samples and features are drawn with or without replacement. When using a subset
of the available samples the generalization accuracy can be estimated with the
out-of-bag samples by setting ``oob_score=True``. As an example, the
snippet below illustrates how to instantiate a bagging ensemble of
:class:`KNeighborsClassifier` base estimators, each built on random subsets of
50% of the samples and 50% of the features.

    >>> from sklearn.ensemble import BaggingClassifier
    >>> from sklearn.neighbors import KNeighborsClassifier
    >>> bagging = BaggingClassifier(KNeighborsClassifier(),
    ...                             max_samples=0.5, max_features=0.5)

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_bias_variance.py`

.. topic:: References

  .. [B1999] L. Breiman, "Pasting small votes for classification in large
         databases and on-line", Machine Learning, 36(1), 85-103, 1999.

  .. [B1996] L. Breiman, "Bagging predictors", Machine Learning, 24(2),
         123-140, 1996.

  .. [H1998] T. Ho, "The random subspace method for constructing decision
         forests", Pattern Analysis and Machine Intelligence, 20(8), 832-844,
         1998.

  .. [LG2012] G. Louppe and P. Geurts, "Ensembles on Random Patches",
         Machine Learning and Knowledge Discovery in Databases, 346-361, 2012.

.. _forest:

Forests of randomized trees
===========================

The :mod:`sklearn.ensemble` module includes two averaging algorithms based
on randomized :ref:`decision trees <tree>`: the RandomForest algorithm
and the Extra-Trees method. Both algorithms are perturb-and-combine
techniques [B1998]_ specifically designed for trees. This means a diverse
set of classifiers is created by introducing randomness in the classifier
construction.  The prediction of the ensemble is given as the averaged
prediction of the individual classifiers.

As other classifiers, forest classifiers have to be fitted with two
arrays: a sparse or dense array X of size ``[n_samples, n_features]`` holding the
training samples, and an array Y of size ``[n_samples]`` holding the
target values (class labels) for the training samples::

    >>> from sklearn.ensemble import RandomForestClassifier
    >>> X = [[0, 0], [1, 1]]
    >>> Y = [0, 1]
    >>> clf = RandomForestClassifier(n_estimators=10)
    >>> clf = clf.fit(X, Y)

Like :ref:`decision trees <tree>`, forests of trees also extend
to :ref:`multi-output problems <tree_multioutput>`  (if Y is an array of size
``[n_samples, n_outputs]``).

Random Forests
--------------

In random forests (see :class:`RandomForestClassifier` and
:class:`RandomForestRegressor` classes), each tree in the ensemble is built
from a sample drawn with replacement (i.e., a bootstrap sample) from the
training set.

Furthermore, when splitting each node during the construction of a tree, the
best split is found either from all input features or a random subset of size
``max_features``. (See the :ref:`parameter tuning guidelines
<random_forest_parameters>` for more details).

The purpose of these two sources of randomness is to decrease the variance of
the forest estimator. Indeed, individual decision trees typically exhibit high
variance and tend to overfit. The injected randomness in forests yield decision
trees with somewhat decoupled prediction errors. By taking an average of those
predictions, some errors can cancel out. Random forests achieve a reduced
variance by combining diverse trees, sometimes at the cost of a slight increase
in bias. In practice the variance reduction is often significant hence yielding
an overall better model.

In contrast to the original publication [B2001]_, the scikit-learn
implementation combines classifiers by averaging their probabilistic
prediction, instead of letting each classifier vote for a single class.

Extremely Randomized Trees
--------------------------

In extremely randomized trees (see :class:`ExtraTreesClassifier`
and :class:`ExtraTreesRegressor` classes), randomness goes one step
further in the way splits are computed. As in random forests, a random
subset of candidate features is used, but instead of looking for the
most discriminative thresholds, thresholds are drawn at random for each
candidate feature and the best of these randomly-generated thresholds is
picked as the splitting rule. This usually allows to reduce the variance
of the model a bit more, at the expense of a slightly greater increase
in bias::

    >>> from sklearn.model_selection import cross_val_score
    >>> from sklearn.datasets import make_blobs
    >>> from sklearn.ensemble import RandomForestClassifier
    >>> from sklearn.ensemble import ExtraTreesClassifier
    >>> from sklearn.tree import DecisionTreeClassifier

    >>> X, y = make_blobs(n_samples=10000, n_features=10, centers=100,
    ...     random_state=0)

    >>> clf = DecisionTreeClassifier(max_depth=None, min_samples_split=2,
    ...     random_state=0)
    >>> scores = cross_val_score(clf, X, y, cv=5)
    >>> scores.mean()
    0.98...

    >>> clf = RandomForestClassifier(n_estimators=10, max_depth=None,
    ...     min_samples_split=2, random_state=0)
    >>> scores = cross_val_score(clf, X, y, cv=5)
    >>> scores.mean()
    0.999...

    >>> clf = ExtraTreesClassifier(n_estimators=10, max_depth=None,
    ...     min_samples_split=2, random_state=0)
    >>> scores = cross_val_score(clf, X, y, cv=5)
    >>> scores.mean() > 0.999
    True

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_forest_iris_001.png
    :target: ../auto_examples/ensemble/plot_forest_iris.html
    :align: center
    :scale: 75%

.. _random_forest_parameters:

Parameters
----------

The main parameters to adjust when using these methods is ``n_estimators`` and
``max_features``. The former is the number of trees in the forest. The larger
the better, but also the longer it will take to compute. In addition, note that
results will stop getting significantly better beyond a critical number of
trees. The latter is the size of the random subsets of features to consider
when splitting a node. The lower the greater the reduction of variance, but
also the greater the increase in bias. Empirical good default values are
``max_features=None`` (always considering all features instead of a random
subset) for regression problems, and ``max_features="sqrt"`` (using a random
subset of size ``sqrt(n_features)``) for classification tasks (where
``n_features`` is the number of features in the data). Good results are often
achieved when setting ``max_depth=None`` in combination with
``min_samples_split=2`` (i.e., when fully developing the trees). Bear in mind
though that these values are usually not optimal, and might result in models
that consume a lot of RAM. The best parameter values should always be
cross-validated. In addition, note that in random forests, bootstrap samples
are used by default (``bootstrap=True``) while the default strategy for
extra-trees is to use the whole dataset (``bootstrap=False``). When using
bootstrap sampling the generalization accuracy can be estimated on the left out
or out-of-bag samples. This can be enabled by setting ``oob_score=True``.

.. note::

    The size of the model with the default parameters is :math:`O( M * N * log (N) )`,
    where :math:`M` is the number of trees and :math:`N` is the number of samples.
    In order to reduce the size of the model, you can change these parameters:
    ``min_samples_split``, ``max_leaf_nodes``, ``max_depth`` and ``min_samples_leaf``.

Parallelization
---------------

Finally, this module also features the parallel construction of the trees
and the parallel computation of the predictions through the ``n_jobs``
parameter. If ``n_jobs=k`` then computations are partitioned into
``k`` jobs, and run on ``k`` cores of the machine. If ``n_jobs=-1``
then all cores available on the machine are used. Note that because of
inter-process communication overhead, the speedup might not be linear
(i.e., using ``k`` jobs will unfortunately not be ``k`` times as
fast). Significant speedup can still be achieved though when building
a large number of trees, or when building a single tree requires a fair
amount of time (e.g., on large datasets).

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_iris.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances_faces.py`
 * :ref:`sphx_glr_auto_examples_miscellaneous_plot_multioutput_face_completion.py`

.. topic:: References

 .. [B2001] L. Breiman, "Random Forests", Machine Learning, 45(1), 5-32, 2001.

 .. [B1998] L. Breiman, "Arcing Classifiers", Annals of Statistics 1998.

 * P. Geurts, D. Ernst., and L. Wehenkel, "Extremely randomized
   trees", Machine Learning, 63(1), 3-42, 2006.

.. _random_forest_feature_importance:

Feature importance evaluation
-----------------------------

The relative rank (i.e. depth) of a feature used as a decision node in a
tree can be used to assess the relative importance of that feature with
respect to the predictability of the target variable. Features used at
the top of the tree contribute to the final prediction decision of a
larger fraction of the input samples. The **expected fraction of the
samples** they contribute to can thus be used as an estimate of the
**relative importance of the features**. In scikit-learn, the fraction of
samples a feature contributes to is combined with the decrease in impurity
from splitting them to create a normalized estimate of the predictive power
of that feature.

By **averaging** the estimates of predictive ability over several randomized
trees one can **reduce the variance** of such an estimate and use it
for feature selection. This is known as the mean decrease in impurity, or MDI.
Refer to [L2014]_ for more information on MDI and feature importance
evaluation with Random Forests.

.. warning::

  The impurity-based feature importances computed on tree-based models suffer
  from two flaws that can lead to misleading conclusions. First they are
  computed on statistics derived from the training dataset and therefore **do
  not necessarily inform us on which features are most important to make good
  predictions on held-out dataset**. Secondly, **they favor high cardinality
  features**, that is features with many unique values.
  :ref:`permutation_importance` is an alternative to impurity-based feature
  importance that does not suffer from these flaws. These two methods of
  obtaining feature importance are explored in:
  :ref:`sphx_glr_auto_examples_inspection_plot_permutation_importance.py`.

The following example shows a color-coded representation of the relative
importances of each individual pixel for a face recognition task using
a :class:`ExtraTreesClassifier` model.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_forest_importances_faces_001.png
   :target: ../auto_examples/ensemble/plot_forest_importances_faces.html
   :align: center
   :scale: 75

In practice those estimates are stored as an attribute named
``feature_importances_`` on the fitted model. This is an array with shape
``(n_features,)`` whose values are positive and sum to 1.0. The higher
the value, the more important is the contribution of the matching feature
to the prediction function.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances_faces.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances.py`

.. topic:: References

 .. [L2014] G. Louppe,
         "Understanding Random Forests: From Theory to Practice",
         PhD Thesis, U. of Liege, 2014.

.. _random_trees_embedding:

Totally Random Trees Embedding
------------------------------

:class:`RandomTreesEmbedding` implements an unsupervised transformation of the
data.  Using a forest of completely random trees, :class:`RandomTreesEmbedding`
encodes the data by the indices of the leaves a data point ends up in.  This
index is then encoded in a one-of-K manner, leading to a high dimensional,
sparse binary coding.
This coding can be computed very efficiently and can then be used as a basis
for other learning tasks.
The size and sparsity of the code can be influenced by choosing the number of
trees and the maximum depth per tree. For each tree in the ensemble, the coding
contains one entry of one. The size of the coding is at most ``n_estimators * 2
** max_depth``, the maximum number of leaves in the forest.

As neighboring data points are more likely to lie within the same leaf of a
tree, the transformation performs an implicit, non-parametric density
estimation.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_random_forest_embedding.py`

 * :ref:`sphx_glr_auto_examples_manifold_plot_lle_digits.py` compares non-linear
   dimensionality reduction techniques on handwritten digits.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_feature_transformation.py` compares
   supervised and unsupervised tree based feature transformations.

.. seealso::

   :ref:`manifold` techniques can also be useful to derive non-linear
   representations of feature space, also these approaches focus also on
   dimensionality reduction.


.. _adaboost:

AdaBoost
========

The module :mod:`sklearn.ensemble` includes the popular boosting algorithm
AdaBoost, introduced in 1995 by Freund and Schapire [FS1995]_.

The core principle of AdaBoost is to fit a sequence of weak learners (i.e.,
models that are only slightly better than random guessing, such as small
decision trees) on repeatedly modified versions of the data. The predictions
from all of them are then combined through a weighted majority vote (or sum) to
produce the final prediction. The data modifications at each so-called boosting
iteration consist of applying weights :math:`w_1`, :math:`w_2`, ..., :math:`w_N`
to each of the training samples. Initially, those weights are all set to
:math:`w_i = 1/N`, so that the first step simply trains a weak learner on the
original data. For each successive iteration, the sample weights are
individually modified and the learning algorithm is reapplied to the reweighted
data. At a given step, those training examples that were incorrectly predicted
by the boosted model induced at the previous step have their weights increased,
whereas the weights are decreased for those that were predicted correctly. As
iterations proceed, examples that are difficult to predict receive
ever-increasing influence. Each subsequent weak learner is thereby forced to
concentrate on the examples that are missed by the previous ones in the sequence
[HTF]_.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_adaboost_hastie_10_2_001.png
   :target: ../auto_examples/ensemble/plot_adaboost_hastie_10_2.html
   :align: center
   :scale: 75

AdaBoost can be used both for classification and regression problems:

  - For multi-class classification, :class:`AdaBoostClassifier` implements
    AdaBoost-SAMME and AdaBoost-SAMME.R [ZZRH2009]_.

  - For regression, :class:`AdaBoostRegressor` implements AdaBoost.R2 [D1997]_.

Usage
-----

The following example shows how to fit an AdaBoost classifier with 100 weak
learners::

    >>> from sklearn.model_selection import cross_val_score
    >>> from sklearn.datasets import load_iris
    >>> from sklearn.ensemble import AdaBoostClassifier

    >>> X, y = load_iris(return_X_y=True)
    >>> clf = AdaBoostClassifier(n_estimators=100)
    >>> scores = cross_val_score(clf, X, y, cv=5)
    >>> scores.mean()
    0.9...

The number of weak learners is controlled by the parameter ``n_estimators``. The
``learning_rate`` parameter controls the contribution of the weak learners in
the final combination. By default, weak learners are decision stumps. Different
weak learners can be specified through the ``base_estimator`` parameter.
The main parameters to tune to obtain good results are ``n_estimators`` and
the complexity of the base estimators (e.g., its depth ``max_depth`` or
minimum required number of samples to consider a split ``min_samples_split``).

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_hastie_10_2.py` compares the
   classification error of a decision stump, decision tree, and a boosted
   decision stump using AdaBoost-SAMME and AdaBoost-SAMME.R.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_multiclass.py` shows the performance
   of AdaBoost-SAMME and AdaBoost-SAMME.R on a multi-class problem.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_twoclass.py` shows the decision boundary
   and decision function values for a non-linearly separable two-class problem
   using AdaBoost-SAMME.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_regression.py` demonstrates regression
   with the AdaBoost.R2 algorithm.

.. topic:: References

 .. [FS1995] Y. Freund, and R. Schapire, "A Decision-Theoretic Generalization of
             On-Line Learning and an Application to Boosting", 1997.

 .. [ZZRH2009] J. Zhu, H. Zou, S. Rosset, T. Hastie. "Multi-class AdaBoost",
               2009.

 .. [D1997] H. Drucker. "Improving Regressors using Boosting Techniques", 1997.

 .. [HTF] T. Hastie, R. Tibshirani and J. Friedman, "Elements of
              Statistical Learning Ed. 2", Springer, 2009.


.. _gradient_boosting:

Gradient Tree Boosting
======================

`Gradient Tree Boosting <https://en.wikipedia.org/wiki/Gradient_boosting>`_
or Gradient Boosted Decision Trees (GBDT) is a generalization
of boosting to arbitrary
differentiable loss functions. GBDT is an accurate and effective
off-the-shelf procedure that can be used for both regression and
classification problems in a
variety of areas including Web search ranking and ecology.

The module :mod:`sklearn.ensemble` provides methods
for both classification and regression via gradient boosted decision
trees.

.. note::

  Scikit-learn 0.21 introduces two new experimental implementations of
  gradient boosting trees, namely :class:`HistGradientBoostingClassifier`
  and :class:`HistGradientBoostingRegressor`, inspired by
  `LightGBM <https://github.com/Microsoft/LightGBM>`__ (See [LightGBM]_).

  These histogram-based estimators can be **orders of magnitude faster**
  than :class:`GradientBoostingClassifier` and
  :class:`GradientBoostingRegressor` when the number of samples is larger
  than tens of thousands of samples.

  They also have built-in support for missing values, which avoids the need
  for an imputer.

  These estimators are described in more detail below in
  :ref:`histogram_based_gradient_boosting`.

  The following guide focuses on :class:`GradientBoostingClassifier` and
  :class:`GradientBoostingRegressor`, which might be preferred for small
  sample sizes since binning may lead to split points that are too approximate
  in this setting.


The usage and the parameters of :class:`GradientBoostingClassifier` and
:class:`GradientBoostingRegressor` are described below. The 2 most important
parameters of these estimators are `n_estimators` and `learning_rate`.

Classification
---------------

:class:`GradientBoostingClassifier` supports both binary and multi-class
classification.
The following example shows how to fit a gradient boosting classifier
with 100 decision stumps as weak learners::

    >>> from sklearn.datasets import make_hastie_10_2
    >>> from sklearn.ensemble import GradientBoostingClassifier

    >>> X, y = make_hastie_10_2(random_state=0)
    >>> X_train, X_test = X[:2000], X[2000:]
    >>> y_train, y_test = y[:2000], y[2000:]

    >>> clf = GradientBoostingClassifier(n_estimators=100, learning_rate=1.0,
    ...     max_depth=1, random_state=0).fit(X_train, y_train)
    >>> clf.score(X_test, y_test)
    0.913...

The number of weak learners (i.e. regression trees) is controlled by the
parameter ``n_estimators``; :ref:`The size of each tree
<gradient_boosting_tree_size>` can be controlled either by setting the tree
depth via ``max_depth`` or by setting the number of leaf nodes via
``max_leaf_nodes``. The ``learning_rate`` is a hyper-parameter in the range
(0.0, 1.0] that controls overfitting via :ref:`shrinkage
<gradient_boosting_shrinkage>` .

.. note::

   Classification with more than 2 classes requires the induction
   of ``n_classes`` regression trees at each iteration,
   thus, the total number of induced trees equals
   ``n_classes * n_estimators``. For datasets with a large number
   of classes we strongly recommend to use
   :class:`HistGradientBoostingClassifier` as an alternative to
   :class:`GradientBoostingClassifier` .

Regression
----------

:class:`GradientBoostingRegressor` supports a number of
:ref:`different loss functions <gradient_boosting_loss>`
for regression which can be specified via the argument
``loss``; the default loss function for regression is least squares (``'ls'``).

::

    >>> import numpy as np
    >>> from sklearn.metrics import mean_squared_error
    >>> from sklearn.datasets import make_friedman1
    >>> from sklearn.ensemble import GradientBoostingRegressor

    >>> X, y = make_friedman1(n_samples=1200, random_state=0, noise=1.0)
    >>> X_train, X_test = X[:200], X[200:]
    >>> y_train, y_test = y[:200], y[200:]
    >>> est = GradientBoostingRegressor(n_estimators=100, learning_rate=0.1,
    ...     max_depth=1, random_state=0, loss='ls').fit(X_train, y_train)
    >>> mean_squared_error(y_test, est.predict(X_test))
    5.00...

The figure below shows the results of applying :class:`GradientBoostingRegressor`
with least squares loss and 500 base learners to the Boston house price dataset
(:func:`sklearn.datasets.load_boston`).
The plot on the left shows the train and test error at each iteration.
The train error at each iteration is stored in the
:attr:`~GradientBoostingRegressor.train_score_` attribute
of the gradient boosting model. The test error at each iterations can be obtained
via the :meth:`~GradientBoostingRegressor.staged_predict` method which returns a
generator that yields the predictions at each stage. Plots like these can be used
to determine the optimal number of trees (i.e. ``n_estimators``) by early stopping.
The plot on the right shows the impurity-based feature importances which can be
obtained via the ``feature_importances_`` property.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_regression_001.png
   :target: ../auto_examples/ensemble/plot_gradient_boosting_regression.html
   :align: center
   :scale: 75

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regression.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_oob.py`

.. _gradient_boosting_warm_start:

Fitting additional weak-learners
--------------------------------

Both :class:`GradientBoostingRegressor` and :class:`GradientBoostingClassifier`
support ``warm_start=True`` which allows you to add more estimators to an already
fitted model.

::

  >>> _ = est.set_params(n_estimators=200, warm_start=True)  # set warm_start and new nr of trees
  >>> _ = est.fit(X_train, y_train) # fit additional 100 trees to est
  >>> mean_squared_error(y_test, est.predict(X_test))
  3.84...

.. _gradient_boosting_tree_size:

Controlling the tree size
-------------------------

The size of the regression tree base learners defines the level of variable
interactions that can be captured by the gradient boosting model. In general,
a tree of depth ``h`` can capture interactions of order ``h`` .
There are two ways in which the size of the individual regression trees can
be controlled.

If you specify ``max_depth=h`` then complete binary trees
of depth ``h`` will be grown. Such trees will have (at most) ``2**h`` leaf nodes
and ``2**h - 1`` split nodes.

Alternatively, you can control the tree size by specifying the number of
leaf nodes via the parameter ``max_leaf_nodes``. In this case,
trees will be grown using best-first search where nodes with the highest improvement
in impurity will be expanded first.
A tree with ``max_leaf_nodes=k`` has ``k - 1`` split nodes and thus can
model interactions of up to order ``max_leaf_nodes - 1`` .

We found that ``max_leaf_nodes=k`` gives comparable results to ``max_depth=k-1``
but is significantly faster to train at the expense of a slightly higher
training error.
The parameter ``max_leaf_nodes`` corresponds to the variable ``J`` in the
chapter on gradient boosting in [F2001]_ and is related to the parameter
``interaction.depth`` in R's gbm package where ``max_leaf_nodes == interaction.depth + 1`` .

Mathematical formulation
-------------------------

We first present GBRT for regression, and then detail the classification
case.

Regression
^^^^^^^^^^

GBRT regressors are additive models whose prediction :math:`y_i` for a
given input :math:`x_i` is of the following form:

  .. math::

    \hat{y_i} = F_M(x_i) = \sum_{m=1}^{M} h_m(x_i)

where the :math:`h_m` are estimators called *weak learners* in the context
of boosting. Gradient Tree Boosting uses :ref:`decision tree regressors
<tree>` of fixed size as weak learners. The constant M corresponds to the
`n_estimators` parameter.

Similar to other boosting algorithms, a GBRT is built in a greedy fashion:

  .. math::

    F_m(x) = F_{m-1}(x) + h_m(x),

where the newly added tree :math:`h_m` is fitted in order to minimize a sum
of losses :math:`L_m`, given the previous ensemble :math:`F_{m-1}`:

  .. math::

    h_m =  \arg\min_{h} L_m = \arg\min_{h} \sum_{i=1}^{n}
    l(y_i, F_{m-1}(x_i) + h(x_i)),

where :math:`l(y_i, F(x_i))` is defined by the `loss` parameter, detailed
in the next section.

By default, the initial model :math:`F_{0}` is chosen as the constant that
minimizes the loss: for a least-squares loss, this is the empirical mean of
the target values. The initial model can also be specified via the ``init``
argument.

Using a first-order Taylor approximation, the value of :math:`l` can be
approximated as follows:

  .. math::

    l(y_i, F_{m-1}(x_i) + h_m(x_i)) \approx
    l(y_i, F_{m-1}(x_i))
    + h_m(x_i)
    \left[ \frac{\partial l(y_i, F(x_i))}{\partial F(x_i)} \right]_{F=F_{m - 1}}.

.. note::

  Briefly, a first-order Taylor approximation says that
  :math:`l(z) \approx l(a) + (z - a) \frac{\partial l(a)}{\partial a}`.
  Here, :math:`z` corresponds to :math:`F_{m - 1}(x_i) + h_m(x_i)`, and
  :math:`a` corresponds to :math:`F_{m-1}(x_i)`

The quantity :math:`\left[ \frac{\partial l(y_i, F(x_i))}{\partial F(x_i)}
\right]_{F=F_{m - 1}}` is the derivative of the loss with respect to its
second parameter, evaluated at :math:`F_{m-1}(x)`. It is easy to compute for
any given :math:`F_{m - 1}(x_i)` in a closed form since the loss is
differentiable. We will denote it by :math:`g_i`.

Removing the constant terms, we have:

  .. math::

    h_m \approx \arg\min_{h} \sum_{i=1}^{n} h(x_i) g_i

This is minimized if :math:`h(x_i)` is fitted to predict a value that is
proportional to the negative gradient :math:`-g_i`. Therefore, at each
iteration, **the estimator** :math:`h_m` **is fitted to predict the negative
gradients of the samples**. The gradients are updated at each iteration.
This can be considered as some kind of gradient descent in a functional
space.

.. note::

  For some losses, e.g. the least absolute deviation (LAD) where the gradients
  are :math:`\pm 1`, the values predicted by a fitted :math:`h_m` are not
  accurate enough: the tree can only output integer values. As a result, the
  leaves values of the tree :math:`h_m` are modified once the tree is
  fitted, such that the leaves values minimize the loss :math:`L_m`. The
  update is loss-dependent: for the LAD loss, the value of a leaf is updated
  to the median of the samples in that leaf.

Classification
^^^^^^^^^^^^^^

Gradient boosting for classification is very similar to the regression case.
However, the sum of the trees :math:`F_M(x_i) = \sum_m h_m(x_i)` is not
homogeneous to a prediction: it cannot be a class, since the trees predict
continuous values.

The mapping from the value :math:`F_M(x_i)` to a class or a probability is
loss-dependent. For the deviance (or log-loss), the probability that
:math:`x_i` belongs to the positive class is modeled as :math:`p(y_i = 1 |
x_i) = \sigma(F_M(x_i))` where :math:`\sigma` is the sigmoid function.

For multiclass classification, K trees (for K classes) are built at each of
the :math:`M` iterations. The probability that :math:`x_i` belongs to class
k is modeled as a softmax of the :math:`F_{M,k}(x_i)` values.

Note that even for a classification task, the :math:`h_m` sub-estimator is
still a regressor, not a classifier. This is because the sub-estimators are
trained to predict (negative) *gradients*, which are always continuous
quantities.

.. _gradient_boosting_loss:

Loss Functions
--------------

The following loss functions are supported and can be specified using
the parameter ``loss``:

  * Regression

    * Least squares (``'ls'``): The natural choice for regression due
      to its superior computational properties. The initial model is
      given by the mean of the target values.
    * Least absolute deviation (``'lad'``): A robust loss function for
      regression. The initial model is given by the median of the
      target values.
    * Huber (``'huber'``): Another robust loss function that combines
      least squares and least absolute deviation; use ``alpha`` to
      control the sensitivity with regards to outliers (see [F2001]_ for
      more details).
    * Quantile (``'quantile'``): A loss function for quantile regression.
      Use ``0 < alpha < 1`` to specify the quantile. This loss function
      can be used to create prediction intervals
      (see :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_quantile.py`).

  * Classification

    * Binomial deviance (``'deviance'``): The negative binomial
      log-likelihood loss function for binary classification (provides
      probability estimates).  The initial model is given by the
      log odds-ratio.
    * Multinomial deviance (``'deviance'``): The negative multinomial
      log-likelihood loss function for multi-class classification with
      ``n_classes`` mutually exclusive classes. It provides
      probability estimates.  The initial model is given by the
      prior probability of each class. At each iteration ``n_classes``
      regression trees have to be constructed which makes GBRT rather
      inefficient for data sets with a large number of classes.
    * Exponential loss (``'exponential'``): The same loss function
      as :class:`AdaBoostClassifier`. Less robust to mislabeled
      examples than ``'deviance'``; can only be used for binary
      classification.

.. _gradient_boosting_shrinkage:

Shrinkage via learning rate
---------------------------

[F2001]_ proposed a simple regularization strategy that scales
the contribution of each weak learner by a constant factor :math:`\nu`:

.. math::

    F_m(x) = F_{m-1}(x) + \nu h_m(x)

The parameter :math:`\nu` is also called the **learning rate** because
it scales the step length the gradient descent procedure; it can
be set via the ``learning_rate`` parameter.

The parameter ``learning_rate`` strongly interacts with the parameter
``n_estimators``, the number of weak learners to fit. Smaller values
of ``learning_rate`` require larger numbers of weak learners to maintain
a constant training error. Empirical evidence suggests that small
values of ``learning_rate`` favor better test error. [HTF]_
recommend to set the learning rate to a small constant
(e.g. ``learning_rate <= 0.1``) and choose ``n_estimators`` by early
stopping. For a more detailed discussion of the interaction between
``learning_rate`` and ``n_estimators`` see [R2007]_.

Subsampling
-----------

[F1999]_ proposed stochastic gradient boosting, which combines gradient
boosting with bootstrap averaging (bagging). At each iteration
the base classifier is trained on a fraction ``subsample`` of
the available training data. The subsample is drawn without replacement.
A typical value of ``subsample`` is 0.5.

The figure below illustrates the effect of shrinkage and subsampling
on the goodness-of-fit of the model. We can clearly see that shrinkage
outperforms no-shrinkage. Subsampling with shrinkage can further increase
the accuracy of the model. Subsampling without shrinkage, on the other hand,
does poorly.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_regularization_001.png
   :target: ../auto_examples/ensemble/plot_gradient_boosting_regularization.html
   :align: center
   :scale: 75

Another strategy to reduce the variance is by subsampling the features
analogous to the random splits in :class:`RandomForestClassifier` .
The number of subsampled features can be controlled via the ``max_features``
parameter.

.. note:: Using a small ``max_features`` value can significantly decrease the runtime.

Stochastic gradient boosting allows to compute out-of-bag estimates of the
test deviance by computing the improvement in deviance on the examples that are
not included in the bootstrap sample (i.e. the out-of-bag examples).
The improvements are stored in the attribute
:attr:`~GradientBoostingRegressor.oob_improvement_`. ``oob_improvement_[i]`` holds
the improvement in terms of the loss on the OOB samples if you add the i-th stage
to the current predictions.
Out-of-bag estimates can be used for model selection, for example to determine
the optimal number of iterations. OOB estimates are usually very pessimistic thus
we recommend to use cross-validation instead and only use OOB if cross-validation
is too time consuming.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regularization.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_oob.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_ensemble_oob.py`

Interpretation with feature importance
--------------------------------------

Individual decision trees can be interpreted easily by simply
visualizing the tree structure. Gradient boosting models, however,
comprise hundreds of regression trees thus they cannot be easily
interpreted by visual inspection of the individual trees. Fortunately,
a number of techniques have been proposed to summarize and interpret
gradient boosting models.

Often features do not contribute equally to predict the target
response; in many situations the majority of the features are in fact
irrelevant.
When interpreting a model, the first question usually is: what are
those important features and how do they contributing in predicting
the target response?

Individual decision trees intrinsically perform feature selection by selecting
appropriate split points. This information can be used to measure the
importance of each feature; the basic idea is: the more often a
feature is used in the split points of a tree the more important that
feature is. This notion of importance can be extended to decision tree
ensembles by simply averaging the impurity-based feature importance of each tree (see
:ref:`random_forest_feature_importance` for more details).

The feature importance scores of a fit gradient boosting model can be
accessed via the ``feature_importances_`` property::

    >>> from sklearn.datasets import make_hastie_10_2
    >>> from sklearn.ensemble import GradientBoostingClassifier

    >>> X, y = make_hastie_10_2(random_state=0)
    >>> clf = GradientBoostingClassifier(n_estimators=100, learning_rate=1.0,
    ...     max_depth=1, random_state=0).fit(X, y)
    >>> clf.feature_importances_
    array([0.10..., 0.10..., 0.11..., ...

Note that this computation of feature importance is based on entropy, and it
is distinct from :func:`sklearn.inspection.permutation_importance` which is
based on permutation of the features.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regression.py`

.. _histogram_based_gradient_boosting:

Histogram-Based Gradient Boosting
=================================

Scikit-learn 0.21 introduced two new experimental implementations of
gradient boosting trees, namely :class:`HistGradientBoostingClassifier`
and :class:`HistGradientBoostingRegressor`, inspired by
`LightGBM <https://github.com/Microsoft/LightGBM>`__ (See [LightGBM]_).

These histogram-based estimators can be **orders of magnitude faster**
than :class:`GradientBoostingClassifier` and
:class:`GradientBoostingRegressor` when the number of samples is larger
than tens of thousands of samples.

They also have built-in support for missing values, which avoids the need
for an imputer.

These fast estimators first bin the input samples ``X`` into
integer-valued bins (typically 256 bins) which tremendously reduces the
number of splitting points to consider, and allows the algorithm to
leverage integer-based data structures (histograms) instead of relying on
sorted continuous values when building the trees. The API of these
estimators is slightly different, and some of the features from
:class:`GradientBoostingClassifier` and :class:`GradientBoostingRegressor`
are not yet supported, for instance some loss functions.

These estimators are still **experimental**: their predictions
and their API might change without any deprecation cycle. To use them, you
need to explicitly import ``enable_hist_gradient_boosting``::

  >>> # explicitly require this experimental feature
  >>> from sklearn.experimental import enable_hist_gradient_boosting  # noqa
  >>> # now you can import normally from ensemble
  >>> from sklearn.ensemble import HistGradientBoostingClassifier

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_inspection_plot_partial_dependence.py`

Usage
-----

Most of the parameters are unchanged from
:class:`GradientBoostingClassifier` and :class:`GradientBoostingRegressor`.
One exception is the ``max_iter`` parameter that replaces ``n_estimators``, and
controls the number of iterations of the boosting process::

  >>> from sklearn.experimental import enable_hist_gradient_boosting
  >>> from sklearn.ensemble import HistGradientBoostingClassifier
  >>> from sklearn.datasets import make_hastie_10_2

  >>> X, y = make_hastie_10_2(random_state=0)
  >>> X_train, X_test = X[:2000], X[2000:]
  >>> y_train, y_test = y[:2000], y[2000:]

  >>> clf = HistGradientBoostingClassifier(max_iter=100).fit(X_train, y_train)
  >>> clf.score(X_test, y_test)
  0.8965

Available losses for regression are 'least_squares',
'least_absolute_deviation', which is less sensitive to outliers, and
'poisson', which is well suited to model counts and frequencies. For
classification, 'binary_crossentropy' is used for binary classification and
'categorical_crossentropy' is used for multiclass classification. By default
the loss is 'auto' and will select the appropriate loss depending on
:term:`y` passed to :term:`fit`.

The size of the trees can be controlled through the ``max_leaf_nodes``,
``max_depth``, and ``min_samples_leaf`` parameters.

The number of bins used to bin the data is controlled with the ``max_bins``
parameter. Using less bins acts as a form of regularization. It is
generally recommended to use as many bins as possible, which is the default.

The ``l2_regularization`` parameter is a regularizer on the loss function and
corresponds to :math:`\lambda` in equation (2) of [XGBoost]_.

Note that **early-stopping is enabled by default if the number of samples is
larger than 10,000**. The early-stopping behaviour is controlled via the
``early-stopping``, ``scoring``, ``validation_fraction``,
``n_iter_no_change``, and ``tol`` parameters. It is possible to early-stop
using an arbitrary :term:`scorer`, or just the training or validation loss.
Note that for technical reasons, using a scorer is significantly slower than
using the loss. By default, early-stopping is performed if there are at least
10,000 samples in the training set, using the validation loss.

Missing values support
----------------------

:class:`HistGradientBoostingClassifier` and
:class:`HistGradientBoostingRegressor` have built-in support for missing
values (NaNs).

During training, the tree grower learns at each split point whether samples
with missing values should go to the left or right child, based on the
potential gain. When predicting, samples with missing values are assigned to
the left or right child consequently::

  >>> from sklearn.experimental import enable_hist_gradient_boosting  # noqa
  >>> from sklearn.ensemble import HistGradientBoostingClassifier
  >>> import numpy as np

  >>> X = np.array([0, 1, 2, np.nan]).reshape(-1, 1)
  >>> y = [0, 0, 1, 1]

  >>> gbdt = HistGradientBoostingClassifier(min_samples_leaf=1).fit(X, y)
  >>> gbdt.predict(X)
  array([0, 0, 1, 1])

When the missingness pattern is predictive, the splits can be done on
whether the feature value is missing or not::

  >>> X = np.array([0, np.nan, 1, 2, np.nan]).reshape(-1, 1)
  >>> y = [0, 1, 0, 0, 1]
  >>> gbdt = HistGradientBoostingClassifier(min_samples_leaf=1,
  ...                                       max_depth=2,
  ...                                       learning_rate=1,
  ...                                       max_iter=1).fit(X, y)
  >>> gbdt.predict(X)
  array([0, 1, 0, 0, 1])

If no missing values were encountered for a given feature during training,
then samples with missing values are mapped to whichever child has the most
samples.

.. _sw_hgbdt:

Sample weight support
---------------------

:class:`HistGradientBoostingClassifier` and
:class:`HistGradientBoostingRegressor` sample support weights during
:term:`fit`.

The following toy example demonstrates how the model ignores the samples with
zero sample weights:

    >>> X = [[1, 0],
    ...      [1, 0],
    ...      [1, 0],
    ...      [0, 1]]
    >>> y = [0, 0, 1, 0]
    >>> # ignore the first 2 training samples by setting their weight to 0
    >>> sample_weight = [0, 0, 1, 1]
    >>> gb = HistGradientBoostingClassifier(min_samples_leaf=1)
    >>> gb.fit(X, y, sample_weight=sample_weight)
    HistGradientBoostingClassifier(...)
    >>> gb.predict([[1, 0]])
    array([1])
    >>> gb.predict_proba([[1, 0]])[0, 1]
    0.99...

As you can see, the `[1, 0]` is comfortably classified as `1` since the first
two samples are ignored due to their sample weights.

Implementation detail: taking sample weights into account amounts to
multiplying the gradients (and the hessians) by the sample weights. Note that
the binning stage (specifically the quantiles computation) does not take the
weights into account.

.. _monotonic_cst_gbdt:

Monotonic Constraints
---------------------

Depending on the problem at hand, you may have prior knowledge indicating
that a given feature should in general have a positive (or negative) effect
on the target value. For example, all else being equal, a higher credit
score should increase the probability of getting approved for a loan.
Monotonic constraints allow you to incorporate such prior knowledge into the
model.

A positive monotonic constraint is a constraint of the form:

:math:`x_1 \leq x_1' \implies F(x_1, x_2) \leq F(x_1', x_2)`,
where :math:`F` is the predictor with two features.

Similarly, a negative monotonic constraint is of the form:

:math:`x_1 \leq x_1' \implies F(x_1, x_2) \geq F(x_1', x_2)`.

Note that monotonic constraints only constraint the output "all else being
equal". Indeed, the following relation **is not enforced** by a positive
constraint: :math:`x_1 \leq x_1' \implies F(x_1, x_2) \leq F(x_1', x_2')`.

You can specify a monotonic constraint on each feature using the
`monotonic_cst` parameter. For each feature, a value of 0 indicates no
constraint, while -1 and 1 indicate a negative and positive constraint,
respectively::

  >>> from sklearn.experimental import enable_hist_gradient_boosting  # noqa
  >>> from sklearn.ensemble import HistGradientBoostingRegressor

  ... # positive, negative, and no constraint on the 3 features
  >>> gbdt = HistGradientBoostingRegressor(monotonic_cst=[1, -1, 0])

In a binary classification context, imposing a monotonic constraint means
that the feature is supposed to have a positive / negative effect on the
probability to belong to the positive class. Monotonic constraints are not
supported for multiclass context.

.. topic:: Examples:

  * :ref:`sphx_glr_auto_examples_ensemble_plot_monotonic_constraints.py`

Low-level parallelism
---------------------

:class:`HistGradientBoostingClassifier` and
:class:`HistGradientBoostingRegressor` have implementations that use OpenMP
for parallelization through Cython. For more details on how to control the
number of threads, please refer to our :ref:`parallelism` notes.

The following parts are parallelized:

- mapping samples from real values to integer-valued bins (finding the bin
  thresholds is however sequential)
- building histograms is parallelized over features
- finding the best split point at a node is parallelized over features
- during fit, mapping samples into the left and right children is
  parallelized over samples
- gradient and hessians computations are parallelized over samples
- predicting is parallelized over samples

Why it's faster
---------------

The bottleneck of a gradient boosting procedure is building the decision
trees. Building a traditional decision tree (as in the other GBDTs
:class:`GradientBoostingClassifier` and :class:`GradientBoostingRegressor`)
requires sorting the samples at each node (for
each feature). Sorting is needed so that the potential gain of a split point
can be computed efficiently. Splitting a single node has thus a complexity
of :math:`\mathcal{O}(n_\text{features} \times n \log(n))` where :math:`n`
is the number of samples at the node.

:class:`HistGradientBoostingClassifier` and
:class:`HistGradientBoostingRegressor`, in contrast, do not require sorting the
feature values and instead use a data-structure called a histogram, where the
samples are implicitly ordered. Building a histogram has a
:math:`\mathcal{O}(n)` complexity, so the node splitting procedure has a
:math:`\mathcal{O}(n_\text{features} \times n)` complexity, much smaller
than the previous one. In addition, instead of considering :math:`n` split
points, we here consider only ``max_bins`` split points, which is much
smaller.

In order to build histograms, the input data `X` needs to be binned into
integer-valued bins. This binning procedure does require sorting the feature
values, but it only happens once at the very beginning of the boosting process
(not at each node, like in :class:`GradientBoostingClassifier` and
:class:`GradientBoostingRegressor`).

Finally, many parts of the implementation of
:class:`HistGradientBoostingClassifier` and
:class:`HistGradientBoostingRegressor` are parallelized.

.. topic:: References

  .. [F1999] Friedmann, Jerome H., 2007, `"Stochastic Gradient Boosting"
     <https://statweb.stanford.edu/~jhf/ftp/stobst.pdf>`_
  .. [R2007] G. Ridgeway, "Generalized Boosted Models: A guide to the gbm
     package", 2007
  .. [XGBoost] Tianqi Chen, Carlos Guestrin, `"XGBoost: A Scalable Tree
     Boosting System" <https://arxiv.org/abs/1603.02754>`_
  .. [LightGBM] Ke et. al. `"LightGBM: A Highly Efficient Gradient
     BoostingDecision Tree" <https://papers.nips.cc/paper/
     6907-lightgbm-a-highly-efficient-gradient-boosting-decision-tree>`_

.. _voting_classifier:

Voting Classifier
========================

The idea behind the :class:`VotingClassifier` is to combine
conceptually different machine learning classifiers and use a majority vote
or the average predicted probabilities (soft vote) to predict the class labels.
Such a classifier can be useful for a set of equally well performing model
in order to balance out their individual weaknesses.


Majority Class Labels (Majority/Hard Voting)
--------------------------------------------

In majority voting, the predicted class label for a particular sample is
the class label that represents the majority (mode) of the class labels
predicted by each individual classifier.

E.g., if the prediction for a given sample is

- classifier 1 -> class 1
- classifier 2 -> class 1
- classifier 3 -> class 2

the VotingClassifier (with ``voting='hard'``) would classify the sample
as "class 1" based on the majority class label.

In the cases of a tie, the :class:`VotingClassifier` will select the class
based on the ascending sort order. E.g., in the following scenario

- classifier 1 -> class 2
- classifier 2 -> class 1

the class label 1 will be assigned to the sample.

Usage
-----

The following example shows how to fit the majority rule classifier::

   >>> from sklearn import datasets
   >>> from sklearn.model_selection import cross_val_score
   >>> from sklearn.linear_model import LogisticRegression
   >>> from sklearn.naive_bayes import GaussianNB
   >>> from sklearn.ensemble import RandomForestClassifier
   >>> from sklearn.ensemble import VotingClassifier

   >>> iris = datasets.load_iris()
   >>> X, y = iris.data[:, 1:3], iris.target

   >>> clf1 = LogisticRegression(random_state=1)
   >>> clf2 = RandomForestClassifier(n_estimators=50, random_state=1)
   >>> clf3 = GaussianNB()

   >>> eclf = VotingClassifier(
   ...     estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)],
   ...     voting='hard')

   >>> for clf, label in zip([clf1, clf2, clf3, eclf], ['Logistic Regression', 'Random Forest', 'naive Bayes', 'Ensemble']):
   ...     scores = cross_val_score(clf, X, y, scoring='accuracy', cv=5)
   ...     print("Accuracy: %0.2f (+/- %0.2f) [%s]" % (scores.mean(), scores.std(), label))
   Accuracy: 0.95 (+/- 0.04) [Logistic Regression]
   Accuracy: 0.94 (+/- 0.04) [Random Forest]
   Accuracy: 0.91 (+/- 0.04) [naive Bayes]
   Accuracy: 0.95 (+/- 0.04) [Ensemble]


Weighted Average Probabilities (Soft Voting)
--------------------------------------------

In contrast to majority voting (hard voting), soft voting
returns the class label as argmax of the sum of predicted probabilities.

Specific weights can be assigned to each classifier via the ``weights``
parameter. When weights are provided, the predicted class probabilities
for each classifier are collected, multiplied by the classifier weight,
and averaged. The final class label is then derived from the class label
with the highest average probability.

To illustrate this with a simple example, let's assume we have 3
classifiers and a 3-class classification problems where we assign
equal weights to all classifiers: w1=1, w2=1, w3=1.

The weighted average probabilities for a sample would then be
calculated as follows:

================  ==========    ==========      ==========
classifier        class 1       class 2         class 3
================  ==========    ==========      ==========
classifier 1	  w1 * 0.2      w1 * 0.5        w1 * 0.3
classifier 2	  w2 * 0.6      w2 * 0.3        w2 * 0.1
classifier 3      w3 * 0.3      w3 * 0.4        w3 * 0.3
weighted average  0.37	        0.4             0.23
================  ==========    ==========      ==========

Here, the predicted class label is 2, since it has the
highest average probability.

The following example illustrates how the decision regions may change
when a soft :class:`VotingClassifier` is used based on an linear Support
Vector Machine, a Decision Tree, and a K-nearest neighbor classifier::

   >>> from sklearn import datasets
   >>> from sklearn.tree import DecisionTreeClassifier
   >>> from sklearn.neighbors import KNeighborsClassifier
   >>> from sklearn.svm import SVC
   >>> from itertools import product
   >>> from sklearn.ensemble import VotingClassifier

   >>> # Loading some example data
   >>> iris = datasets.load_iris()
   >>> X = iris.data[:, [0, 2]]
   >>> y = iris.target

   >>> # Training classifiers
   >>> clf1 = DecisionTreeClassifier(max_depth=4)
   >>> clf2 = KNeighborsClassifier(n_neighbors=7)
   >>> clf3 = SVC(kernel='rbf', probability=True)
   >>> eclf = VotingClassifier(estimators=[('dt', clf1), ('knn', clf2), ('svc', clf3)],
   ...                         voting='soft', weights=[2, 1, 2])

   >>> clf1 = clf1.fit(X, y)
   >>> clf2 = clf2.fit(X, y)
   >>> clf3 = clf3.fit(X, y)
   >>> eclf = eclf.fit(X, y)

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_voting_decision_regions_001.png
    :target: ../auto_examples/ensemble/plot_voting_decision_regions.html
    :align: center
    :scale: 75%

Using the `VotingClassifier` with `GridSearchCV`
------------------------------------------------

The :class:`VotingClassifier` can also be used together with
:class:`~sklearn.model_selection.GridSearchCV` in order to tune the
hyperparameters of the individual estimators::

   >>> from sklearn.model_selection import GridSearchCV
   >>> clf1 = LogisticRegression(random_state=1)
   >>> clf2 = RandomForestClassifier(random_state=1)
   >>> clf3 = GaussianNB()
   >>> eclf = VotingClassifier(
   ...     estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)],
   ...     voting='soft'
   ... )

   >>> params = {'lr__C': [1.0, 100.0], 'rf__n_estimators': [20, 200]}

   >>> grid = GridSearchCV(estimator=eclf, param_grid=params, cv=5)
   >>> grid = grid.fit(iris.data, iris.target)

Usage
-----

In order to predict the class labels based on the predicted
class-probabilities (scikit-learn estimators in the VotingClassifier
must support ``predict_proba`` method)::

   >>> eclf = VotingClassifier(
   ...     estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)],
   ...     voting='soft'
   ... )

Optionally, weights can be provided for the individual classifiers::

   >>> eclf = VotingClassifier(
   ...     estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)],
   ...     voting='soft', weights=[2,5,1]
   ... )

.. _voting_regressor:

Voting Regressor
================

The idea behind the :class:`VotingRegressor` is to combine conceptually
different machine learning regressors and return the average predicted values.
Such a regressor can be useful for a set of equally well performing models
in order to balance out their individual weaknesses.

Usage
-----

The following example shows how to fit the VotingRegressor::

   >>> from sklearn.datasets import load_boston
   >>> from sklearn.ensemble import GradientBoostingRegressor
   >>> from sklearn.ensemble import RandomForestRegressor
   >>> from sklearn.linear_model import LinearRegression
   >>> from sklearn.ensemble import VotingRegressor

   >>> # Loading some example data
   >>> X, y = load_boston(return_X_y=True)

   >>> # Training classifiers
   >>> reg1 = GradientBoostingRegressor(random_state=1, n_estimators=10)
   >>> reg2 = RandomForestRegressor(random_state=1, n_estimators=10)
   >>> reg3 = LinearRegression()
   >>> ereg = VotingRegressor(estimators=[('gb', reg1), ('rf', reg2), ('lr', reg3)])
   >>> ereg = ereg.fit(X, y)

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_voting_regressor_001.png
    :target: ../auto_examples/ensemble/plot_voting_regressor.html
    :align: center
    :scale: 75%

.. topic:: Examples:

  * :ref:`sphx_glr_auto_examples_ensemble_plot_voting_regressor.py`

.. _stacking:

Stacked generalization
======================

Stacked generalization is a method for combining estimators to reduce their
biases [W1992]_ [HTF]_. More precisely, the predictions of each individual
estimator are stacked together and used as input to a final estimator to
compute the prediction. This final estimator is trained through
cross-validation.

The :class:`StackingClassifier` and :class:`StackingRegressor` provide such
strategies which can be applied to classification and regression problems.

The `estimators` parameter corresponds to the list of the estimators which
are stacked together in parallel on the input data. It should be given as a
list of names and estimators::

  >>> from sklearn.linear_model import RidgeCV, LassoCV
  >>> from sklearn.svm import SVR
  >>> estimators = [('ridge', RidgeCV()),
  ...               ('lasso', LassoCV(random_state=42)),
  ...               ('svr', SVR(C=1, gamma=1e-6))]

The `final_estimator` will use the predictions of the `estimators` as input. It
needs to be a classifier or a regressor when using :class:`StackingClassifier`
or :class:`StackingRegressor`, respectively::

  >>> from sklearn.ensemble import GradientBoostingRegressor
  >>> from sklearn.ensemble import StackingRegressor
  >>> reg = StackingRegressor(
  ...     estimators=estimators,
  ...     final_estimator=GradientBoostingRegressor(random_state=42))

To train the `estimators` and `final_estimator`, the `fit` method needs
to be called on the training data::

  >>> from sklearn.datasets import load_boston
  >>> X, y = load_boston(return_X_y=True)
  >>> from sklearn.model_selection import train_test_split
  >>> X_train, X_test, y_train, y_test = train_test_split(X, y,
  ...                                                     random_state=42)
  >>> reg.fit(X_train, y_train)
  StackingRegressor(...)

During training, the `estimators` are fitted on the whole training data
`X_train`. They will be used when calling `predict` or `predict_proba`. To
generalize and avoid over-fitting, the `final_estimator` is trained on
out-samples using :func:`sklearn.model_selection.cross_val_predict` internally.

For :class:`StackingClassifier`, note that the output of the ``estimators`` is
controlled by the parameter `stack_method` and it is called by each estimator.
This parameter is either a string, being estimator method names, or `'auto'`
which will automatically identify an available method depending on the
availability, tested in the order of preference: `predict_proba`,
`decision_function` and `predict`.

A :class:`StackingRegressor` and :class:`StackingClassifier` can be used as
any other regressor or classifier, exposing a `predict`, `predict_proba`, and
`decision_function` methods, e.g.::

   >>> y_pred = reg.predict(X_test)
   >>> from sklearn.metrics import r2_score
   >>> print('R2 score: {:.2f}'.format(r2_score(y_test, y_pred)))
   R2 score: 0.81

Note that it is also possible to get the output of the stacked
`estimators` using the `transform` method::

  >>> reg.transform(X_test[:5])
  array([[28.78..., 28.43...  , 22.62...],
         [35.96..., 32.58..., 23.68...],
         [14.97..., 14.05..., 16.45...],
         [25.19..., 25.54..., 22.92...],
         [18.93..., 19.26..., 17.03... ]])

In practise, a stacking predictor predict as good as the best predictor of the
base layer and even sometimes outputperform it by combining the different
strength of the these predictors. However, training a stacking predictor is
computationally expensive.

.. note::
   For :class:`StackingClassifier`, when using `stack_method_='predict_proba'`,
   the first column is dropped when the problem is a binary classification
   problem. Indeed, both probability columns predicted by each estimator are
   perfectly collinear.

.. note::
   Multiple stacking layers can be achieved by assigning `final_estimator` to
   a :class:`StackingClassifier` or :class:`StackingRegressor`::

    >>> final_layer = StackingRegressor(
    ...     estimators=[('rf', RandomForestRegressor(random_state=42)),
    ...                 ('gbrt', GradientBoostingRegressor(random_state=42))],
    ...     final_estimator=RidgeCV()
    ...     )
    >>> multi_layer_regressor = StackingRegressor(
    ...     estimators=[('ridge', RidgeCV()),
    ...                 ('lasso', LassoCV(random_state=42)),
    ...                 ('svr', SVR(C=1, gamma=1e-6, kernel='rbf'))],
    ...     final_estimator=final_layer
    ... )
    >>> multi_layer_regressor.fit(X_train, y_train)
    StackingRegressor(...)
    >>> print('R2 score: {:.2f}'
    ...       .format(multi_layer_regressor.score(X_test, y_test)))
    R2 score: 0.83

.. topic:: References

   .. [W1992] Wolpert, David H. "Stacked generalization." Neural networks 5.2
      (1992): 241-259.
